Spot Shooter Archery

Store Hours:
Mon, Wed - Fri :10a - 6p
Tues: 10a - 8p
Sat: 10a - 4p
Sun: Closed

Get Directions >>

Why do I keep hitting my bow arm with the string?

Dear Jim,  

Why do I keep hitting my bow arm with the string when I shoot my bow? It doesn’t  happen all the time but I’m getting some red marks more often than I would like.


The first thing I would do is buy an arm guard until you solve the problem. Two things come to mind that would cause you to hit your arm. One is improper grip on the bow. You might have too much hand on your grip. Try not letting the grip of the handle contact the outside of your life line on your hand. Your knuckles should be at a 45 degree angle when you grip your bow with your hand completely relaxed. Let the bow just sit on the grip without gripping it. Another possibility is your draw length might be too long causing you to close the distance between the string and your arm. I’m confident that with the proper grip of the bow and the correct  draw  length this should eliminate your hitting your arm.

-Jim

I Don’t Know if I Should Install a New String & Cables

Dear Jim, 

I bought a used bow off the internet  and I don’t know if I should install a new string and cables. They look fine but I want to be sure. Any advice?


Depending on the age of the bow is a factor in changing your string and cables. If its an older bow three years or older you might consider changing them just to be safe. I have had bow strings blow up in the case because of dry rot or just plain wore out. Also check for serving separation around the cams and where the arrow attaches to the center serving. If it’s a newer bow and the servings look good your probably good for a year or so.

-Jim

My hunting bow creaks when I pull it back almost to full draw.

Dear Jim,   

My hunting bow creaks when I pull it back almost to full draw. Sometimes it only happens on the first time I pull it back but its not good for hunting. Any suggestions on my problem?


First check your limbs for cracks or splinters as it could be a bad limb. Most of the time a bow lube will do the job. This process requires taking the bow apart and applying lithium grease in the limb pockets and an axle lube. This should solve “the creaky bow”.

-Jim

Loading...
Get Special Offers Via Email